Edirol V-4 Bedienungsanleitung PDF herunterladen (Seite 89)

100

MIDI implementation

Model:V-4 Version:1.000 Date:Dec.10.2002

Symbol Meaning Range

----------------------------------------------------------------------------------------------------------------------

n: MIDI channel 0H--FH (ch.1--ch.16)

vv: control value, velocity value, etc. 00H--7FH (0--127)

only in the case of Note-on Velocity 01H--7FH (1--127)

kk: note number 00H--7FH (0--127)

xx: on/off switch 00H--3FH (0--63): OFF

40H--7FH (64--127): ON

----------------------------------------------------------------------------------------------------------------------

1. MIDI messages received at MIDI IN

* If MIDI Thru is ON, MIDI messages received at MIDI IN will be retransmitted without

change from MIDI OUT.

■Channel voice messages

●Note-on

Status 2nd byte 3rd byte

--------------------------------------------------------------------

9nH kkH vvH

* Received only if Note Mode is ON.

* The input of each channel is selected. Ignored if a non-selectable note message is

received.

* When Presentation mode is ON, the transition time will change according to the velocity

value (channel A only).

* Inputs correspond to note numbers as follows.

---------------------------------------

Note No. Input

---------------------------------------

24H A Ch, 1

26H A Ch, 2

28H A Ch, 3

29H A Ch, 4

---------------------------------------

2BH B Ch, 1

2DH B Ch, 2

2FH B Ch, 3

30H B Ch, 4

---------------------------------------

●Control Change

* By making settings in MIDI Setup, you can use these messages to control a wide variety

of things. The control changes that can be used are CC#1--5, 7--31, and 64--95. For details

on the factory settings, refer to “Settings Transmitted/Received Using MIDI” (p.95).

❍Bank Select (controller numbers 0, 32)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 00H mmH

BnH 20H llH

mm, ll= bank number:00 00H - 7F 7FH(bank, 1 - bank, 16384)

* Bank Select LSB will be ignored.

* Processing of a Bank Select message is suspended until a subsequent Program Change is

received.

* If a non-selectable Bank Select is received, it will be ignored, and only the Program

Change will be received.

* Bank Select data that is received will be maintained until a subsequent Bank Select is

received.

* These messages select inputs for each channel, set memories, and specify how the sub-

channel is mixed in Presentation mode.

Controls correspond to bank select messages as follows.

Bank Select Program No. Control

MSB/LSB

-------------------------------------------------------------------------------

50H/00H 00H - 07H MEMORY 1-8

-------------------------------------------------------------------------------

00H/00H 00H - 03H A ch, INPUT 1-4

-------------------------------------------------------------------------------

01H/00H 00H - 03H B ch, INPUT 1-4

❍Modulation (controller number 1)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 01H vvH

❍Breath-type (controller number 2)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 02H vvH

❍Foot-type (controller number 4)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 04H vvH

❍Portamento Time (controller number 5)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 05H vvH

❍Volume (controller number 7)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 07H vvH

❍Balance (controller number 8)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 08H vvH

❍Panpot (controller number 10)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 0AH vvH

❍Expression (controller number 11)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 0BH vvH

❍Effect Control 1 (controller number 12)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 0CH vvH

❍Effect Control 2 (controller number 13)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 0DH vvH

❍General Purpose Controllers 1--4 (controller numbers 16-19)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 10H - 13H vvH

❍Hold 1 (controller number 64)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 40H xxH

❍Portamento (controller number 65)

Status 2nd byte 3rd byte

--------------------------------------------------------------------

BnH 41H xxH

❍Sostenuto (controller number 66)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 42H xxH

❍Soft (controller number 67)

Status 2nd byte 3rd byte

---------------------------------------------------------------------

BnH 43H xxH

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Edirol V-4 Bedienungsanleitung Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Edirol V-4